Spiral Point
 |
SPT-0348 03-48 NC High Speed Steel 3 Flute Ground Thread Spiral Point Tap List Price: $9.28 Sale Price: $2.98  |
|
Spiral Point Taps are also known as gun taps, these are typically used in through hole tapping. Have an angular point that pushes chips ahead of the tap and out of the hole. Also for use in deep blind holes where accumulated chips are beyond the length of the thread being cut. |
Spiral Point
 |
 222 Pcs Standard Tool GH3 Spiral Point Plug Taps Kit  US $880.00
|
 180 Pcs Standard Tool 2FLT Spiral Point Plug Taps Kit US $575.00
|
 120 Pcs Standard Tool 2FLT Spiral Point Plug Taps Kit US $375.00
|
 96 Pcs Standard Tool GH3 Spiral Point Plug Taps Kit US $375.00
|
 42 NEW M18 x 25 SPPT SPIRAL POINT TAPS 3 FLUTES S176 US $199.99
|
 60 Pcs Standard Tool 2FLT Spiral Point Plug Taps Kit US $190.00
|
 10 Pc OSG 1 2 13 HY PRO Spiral Point Plug CNC S O Taps US $190.00
|
 10 Pcs OSG 2 56 HY PRO Spiral Point Plug CNC S O Taps US $164.50
|
 1 2 13 H3 Spiral Point OSG 12324 Plug Tap 12pcs US $131.50
|
 10 Pc OSG 3 8 16 HY PRO Spiral Point Plug CNC S O Taps US $126.75
|
 36 Pcs Standard Tool 6 32 2FLT Spiral Point Plug Taps US $115.00
|
 36 Pcs Standard Tool 8 32 2FL Spiral Point Plug Taps US $115.00
|
 36 Pcs Standard Tool 10 24 2FL Spiral Point Plug Taps US $115.00
|
 36 Pcs Standard Tool 10 32 2FL Spiral Point Plug Taps US $115.00
|
 36 Pcs Standard Tool 1 4 20 2FL Spiral Point Plug Taps US $115.00
|
 52 NEW 3 8 24 SPPT SPIRAL POINT GH3 TAPS 3 FL S164 US $109.99
|
 10 Pcs OSG 4 40 HY PRO Spiral Point Plug CNC S O Taps US $108.25
|
 3 Pcs OSG 5 8 11 HY PRO Spiral Point Plug CNC S O Taps US $103.50
|
 10 Pc OSG 1 4 20 HY PRO Spiral Point Plug CNC S O Taps US $100.00
|
 MICHIGAN DRILL SPIRAL POINT TAPS ERICKSON KTC062 COLLET US $99.99
|
 3 NEW 1 14 SPPT SPIRAL POINT PLUG TAPS GOLD COATED S171 US $99.99
|
 27 NEW 9 16 12 SPPT SPIRAL POINT GH3 PLUG TAP 3 FL S162 US $99.99
|
 9 NEW AMERICAN M22 X 25 SPIRAL POINT PLUG TAPS R824 US $99.99
|
 5 Pcs OSG 1 2 20 HY PRO Spiral Point Plug CNC S O Taps US $95.00
|
 12 Pcs Standard Tool 1 2 13 3FL Spiral Point Plug Taps US $90.50
|
 10 Pcs OSG 10 24 HY PRO Spiral Point Plug CNC S O Taps US $90.00
|
 10 Pcs OSG 10 32 HY PRO Spiral Point Plug CNC S O Taps US $90.00
|
 10 Pcs OSG 6 32 HY PRO Spiral Point Plug CNC S O Taps US $90.00
|
 R N 505250 6 40 NF H1 SPIRAL POINT TAP one lot of 18 US $89.99
|
 REGAL 6 40 NF H1 SPIRAL POINT TAP US $89.00
|
 Metric Spiral Point Plug Tap Set 3 12mm US $80.00
|
 80 NEW M45 x 75 SPPT SPIRAL POINT 2 FLUTE S178 US $79.99
|
 24 Pcs Standard Tool 10 24 2FL Spiral Point Plug Taps US $78.00
|
 24 Pcs Standard Tool 10 32 2FL Spiral Point Plug Taps US $78.00
|
 24 Pcs Standard Tool 1 4 20 2FL Spiral Point Plug Taps US $78.00
|
 24 Pcs Standard Tool 6 32 2FL Spiral Point Plug Taps US $78.00
|
 24 Pcs Standard Tool 8 32 2FL Spiral Point Plug Taps US $78.00
|
 3 8 16 H3 Spiral Point OSG 12316 Plug Tap 12pcs US $75.75
|
 REIFF NESTOR RFN 39742 SPIRAL POINT PLUG TAP US $75.00
|
 5 Taps Spiral Point Plug 3 flute 3 4 10 3 TiNi SALE US $74.99
|
 BALAX 1 4 28 Cobalt Spiral Point Plug Taps QTY12 BB22 US $74.95
|
 3 Pcs Standard Tool 3 4 10 3FL Spiral Point Plug Taps US $71.25
|
 4 40 H2 Spiral Point OSG 12064 Plug Tap 12pcs US $70.25
|
 6 Pc OSG 5 16 18 HY PRO Spiral Point Plug CNC S O Taps US $67.50
|
Tapered bit (I use for plastics), multi.spiral flutes, sharp point to approx 1/2", 5-7" long. Can't find.
I lost a speciality drill bit that I used for drilling holes in plastic. It's old and I forgot where I bought it. It is approx. 5-6" long, has 2-3 spiral flutes which are sharp at one end and taper up to approx. 1/2 inch. I can't find one and I don't even know what it is called.
sounds like a uni-bit made by lennox available at most home improvement or hardware stores
hope this helps
PC200E Spiral Coil Binding Machine Review
As the least expensive spiral coil binding machine that offers disengageable dies and an electric coil inserter, the PC200E is well positioned in the marketplace. Presented as a binding solution for small or home offices, this machine has some strong features and a couple of weaknesses worth mentioning. Here is our opinion of the PC200E spiral coil binding system.
Strengths:
- At this price point, it would be reasonable to expect the PC200E to be made of cheap plastic parts. We certainly did, and were very pleasantly surprised to find that this machine is of solid metal construction. As far as we can tell, this is a machine that is built to last a long time, and if used in a small office or home setting, it may just last forever.
- The most impressive feature of the PC200E is that it all of its punching dies are disengageable. This is almost unheard of for a spiral coil binding machine at this price point. For the uninitiated, what this means is that you can stop any one of the punching pins from punching. That enables the user to bind documents of just about any length without worrying about a half hole on the edge of your paper. The open throat design that the PC200E features allows users to bind documents that are longer than eleven inches, using a multi-step process. This is some pretty remarkable flexibility to have at such a low price.
- The PC200E includes an electric spiral coil inserter that is operated by a foot pedal. This is bordering on brilliant as it allows the user to hold the pages of the document together with both hands during coiling. We found this very handy, as it were, and were very impressed at how much easier and more efficient it made the whole process.
- We can't stress enough that to do spiral coil binding correctly you need to have a pair of crimping pliers, and the PC200E has the foresight to include them in the box. While it's only about a thirty dollar value, it saves the user from having to find a pair of these pliers somewhere, or worse, attempting to finish the binding process without them.
Weaknesses:
- We thought the handle was a little laborious to use. The machine we tested, in fact had a handle that was designed differently than we have seen in photos of the machine. A lot of similar machines have an extension at ninety degrees that make it just a little bit easier to operate. This is not a big deal for smaller project, but it may increase the tedium and discomfort if the user is going to bind a large number of documents.
- The twelve to fifteen pages per lift capacity of the PC200E isn't too bad for businesses or organizations that are only going to be binding a few books in an average week. However, that kind of capacity would not be appropriate for larger projects or heavy use.
- The inclusion of the spiral coil inserter is great, but we found its placement at the top of the machine to be a little bit unwieldy. Other machines place the inserter on the front of the machine where it is more convenient to reach for coil inserting.
About the Author
If you are interested in purchasing the PC200E Coil Binding Machine for your office, you should really check out MyBinding.com. They offer an excellent price and free shipping on this binding machine. Plus, they carry one of the largest selections of Spiral Coil Binding Supplies available on the internet. Choose from more than fifty different colors and twenty seven different sizes. Check it out today!